Extron electronic MPX 866 A manual Button Labels, Printing Instructions

Button Labels

Figure 77 on page 128 provides blank button labels for 16-button switchers. Feel free to photocopy them or cut them out of the guide, write button information in each button area as desired, and put them in the label window of the switcher.

To remove a panel, insert the Phillips-head end of a Tweeker or small Phillips-head screwdriver into the hole in one end of the panel, and gently slide the tab at the edge of the panel out of the recess in the switcher housing.

Printing Instructions

If you print these strips to cut out and use in your switcher:

zzPrint on A-size, 8-1/2 inch by 11 inch (letter) paper, in portrait orientation. zz Set page scaling to None.

zzAfter printing, verify that the printed strips fit behind the panel. Your printer configuration may cause the strip to be printed smaller or larger than specified.

MPX 866 A Media Presentation Matrix Switcher • Reference Information 127