Extron electronic MPX 866 A manual Matrix Software, Matrix Switchers Control Program

Matrix Software

This section introduces the Extron Matrix Switchers Control Program software that is included with the MPX 866 A Media Presentation Matrix Switcher switchers, including:

zzMatrix Switchers Control Program zz Button Label Generator

Matrix Switchers Control Program

The Matrix Switchers Control Program communicates with the switcher via the Ethernet LAN port or either serial port to provide an easy way to set up ties and sets of ties. The program is compatible with Windows 2000, Windows XP, Windows 7, and newer operating systems. Updates to the program can be downloaded from the Extron website (www.extron.com).

Installing the Software

The program is contained on the Extron Software Products DVD. Install the software as follows:

NOTE: For full functionality, install both of the following programs:

• The Matrix Switchers Control Program

• The Firmware Loader

1.Insert the DVD into the drive. The Extron software DVD window should appear automatically (see figure 30).

Figure 30. Software DVD Window

NOTE: If the window does not self-open, run Launch.exe from the DVD.

MPX 866 A Media Presentation Matrix Switcher • HTML Operation 74