Extron electronic MSG0804, MSG0808 manual CTL120-2 IR Remote Control, Press this button first

CTL120-2 IR Remote Control

The CTL120-2 IR Remote Control sends infrared commands to the built-in infrared receiver in the MSG switchers to control various switcher functions. The illustration below shows the location and function of each button on the Remote Control unit that can be used to control the MSG matrix switchers.

Initially, press the Matrix button on the Remote Control unit to change it to matrix switcher mode.

To switch to a new input/output configuration using the CTL120-2 Remote Control:

1.Press the button on the remote control unit that corresponds to the desired output select button.

2.Press the button on the remote control unit that corresponds to the desired input that you want to connect to the output.

3.Press the Enter button to confirm the configuration.

MATRIX

Matrix Button Press this button first to set the CTL120-2

to control the MSG0804 or MSG0808 matrix switchers

Important!

Press this button first!

S

VIDEO
SCALER SWITCHER	MATRIX	AUDIO

Numeric Buttons

Press to select desired output, then to select desired input

Press the Enter button to confirm the configuration

1 2 3

4 5 6

7 8 9

	0	ENTER
PIP		ENT
INPUT		RECALL

FREEZE

	MENU		OK
MENU	CH VOL		ENTER
+		+
–		–

"0" Button Press to blank the currently selected input

Enter Button

Press to make menu selection, or to execute a new setting when using on-screen commands

Volume Buttons

Press (+) to increase volume, or (-) to decrease volume

BLANKMUTE

Mute Button

Press to mute audio

Figure 5-3 — CTL120-2 Infrared Remote Control

MSG Matrix Switchers • Remote Control 5-11