Bandwidth — Bandwidth is a minimum of 225 MHz (475 MHz on HR models) at -3dB, fully loaded, allowing these switchers to switch high-resolution computer displays.

Flexible Control Options

Front Panel Control — Provides push button input and output selection, preset creation and selection, and audio volume and mute control, using large, soft-touch, color-coded rubber buttons; LED indicators show confirmation of current or pending ties.

RS-232, RS-422, and RS-485 remote control — Allows third-party remote control of features and functions using the Serial Control Protocol, or ICS100 control software for Windows®.

Remote control from a network — IP Server software (included) provides comprehensive control of the switcher functions over a LAN, WAN, or the Internet, via the RS-232 port.

IR remote control — Enables the user to select inputs/outputs and adjust volume using the optional CTL 120-2 IR Remote Control.

Front Panel Lockout mode — Locks out all front panel functions. When front panel lockout mode is active, all controls are still available through RS-232, RS-422, or RS-485 commands.

Rack-mountable— The 3U high, full rack width, metal enclosure is rack- mountable.

32 presets — Store and recall up to 32 (via serial commands) or 12 (MSG0804) or 16 (MSG0808)(via front panel) different input/output configuration and audio level presets.

Genlock input/output — Enables vertical interval switching for glitch-free transitioins when it’s used with a blackburst generator and synchronous video sources.

MSG Matrix Switchers • Introduction

1-3

Page 9
Image 9
Extron electronic MSG0804, MSG0808 manual Flexible Control Options