Extron electronic P/2 DA2 WM EC F Two, Controls and Installation, Features, Introduction

Introduction

About the P/2 DA2 WM F/EC F, AAP, and D Models

The P/2 DA2 WM F/F EC, AAP, and D models are one input, two output, high resolution VGA/XGA distribution amplifiers with audio. With a video bandwidth of 300 MHz, these distribution amplifiers are compatible with VGA, SVGA, VESA, XGA, and SXGA graphics cards, monitors, projectors, and LCD panels. The D model features Decora® faceplates and trim.

For audio, the P/2 DA2 WM F/EC F and D feature a 3.5 mm female jack for input and a 3.5 mm captive screw connector for balanced or unbalanced output. The D model features a DIP switch for selecting stereo or dual mono output.

The P/2 DA2 WM F is the wallmount version and the P/2 DA2 WM EC F is the Euro Channel version. The

P/2 DA2 WM F AAP and the P/2 DA2 WM EC F AAP are the same base products, but with AAP faceplates added. These plates are a convenient method of providing various connectors for most audio and video applications.

Features

2-color power/signal LED — When the interface is on, the power/signal LED lights amber. When the interface is on and a signal is present, the LED lights green.

Gain/peak control— Compensates for signal degradation caused by long cable lengths.

Stereo audio — Front panel audio input jack and a 3.5 mm captive screw output connector on the rear panel.

Buffered local monitor output — 15-pin HD female connector Computer video input — 15-pin HD female connector

Wall mountable (WM model) — Self-contained enclosure provides for convenient wall mounting.

Euro Channel mountable (EC model) — This model mounts easily in the Euro Channel raceway

Optional architectural adapter plates — The

P/2 DA2 WM F AAP may be user-configured with up to four Architectural Adapter Plates (three for the EC AAP version). These adapter plates provide a selection of pass-through signal connectors for various audio and video requirements.

P/2 DA2 WM/EC/D/AAP Series

Chapter2Two

Controls and Installation

Front and Rear Panels

Installing the P/2 DA2 WM F/EC F

Installing the P/2 DA2 D

1-2 P/2 DA2 WM/EC/D/AAP Series • Introduction P/2 DA2 WM/EC/D/AAP Series • Introduction