Manuals / Extron electronic / Computer Equipment / Network Card

Extron electronic PVS 400, 300, 200 manual 4c Attach and screw down rear plate

Models: 200 300 400 PVS 400

1 50
Download 50 pages 35.12 Kb
Page 37
Image 37
4c Attach and screw down rear plate

b.Align the bottom plate lugs with the slots in the top plate and slide up and into place.

c.Attach the rear plate to secure the PMK 450. Ensure the power cable exits via the cable notch in the top plate, or via the gap in front of the filler plate at the bottom (see

4d image).

FRONT

 

 

REAR

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Rear Plate

4c Attach and screw down rear plate

d.Screw the UPB 25 adjuster plate back onto the base of the PMP, and replace the projector (with the UPB 25 bracket attached) on the adjuster plate.

e.Connect the switchers VGA and RCA cables to the projector.

f.Connect the projector control cable from the MLC to the projector. Refer to the projector’s user manual for RS-232control port pinout details.

4d Replace projector on the adjuster plate

PoleVault Systems Installation • Installation — Stage 4 2-25

Page 36 Page 38
Page 37
Image 37
Extron electronic PVS 400, 300, 200 manual 4c Attach and screw down rear plate, 4d Replace projector on the adjuster plate
Page 36 Page 38