Extron electronic 200, PVS 400 Introduction, Overview, The PoleVault System, FCC Class A Notice

Introduction

FCC Class A Notice

This equipment has been tested and found to comply with the limits for a Class A digital device, pursuant to part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. The Class A limits are designed to provide reasonable protection against harmful interference when the equipment is operated in a commercial environment. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instruction manual, may cause harmful interference to radio communications. Operation of this equipment in a residential area is likely to cause harmful interference, in which case the user will be required to correct the interference at his own expense.

Overview

This manual covers the installation of the Extron PoleVault™ System in a drop ceiling room with a wood or concrete structural ceiling above. If the location has a concrete or beam style ceiling and no drop ceiling, alternative ceiling mounts can be obtained separately from Extron (see 2c, "Optional items", page 1-9). For those types of installation, refer to the individual mounting hardware user's manuals for the method.

It is assumed that the installer has some knowledge and experience of A/V, electrical, or electronic device installation. This manual guides the A/V installer through the steps for installation and connection of each of the system’s component parts.

It may be that the locations for the devices (e.g., wall plates, projector, and screen) have been pre-determined. However, some room installation examples are given to help in installations where final location is yet to be determined.

The PoleVault System

Extron PoleVault Systems are easy-to-use, network-enabled, all-inclusive packages, making them ideal for single- projector K-12 classrooms. PoleVault Systems use economical twisted pair cables for transmitting signals and include network connectivity for Web-based asset management, monitoring, and control.

NThe hardware and devices listed on the inventory pages have individual user manuals which have detailed safety information, installation, set-up, and configuration instructions, and should be referred to as needed.

For operation and set up of the projector, screen, and input devices, refer to the relevant manufacturer's manuals supplied with those devices.

PoleVault Systems Installation • Introduction 1-1