Oil in Water Analyzer | Operation 3 | |
|
|
|
|
|
|
|
|
|
Enter password:
T A I
or
Enter password:
A A A
The screen prompts you to enter the current password. If you are not using password protection, Enter three times to accept TAI as the default password. If a password has been previously installed, enter the password using the UP/ DOWN SWITCH to change the first letter.
Use Enter to move to the next letter. You cannot go back. If a mistake is made, Escape to the System menu and return.
Whenyoufinishadjustingthelastletter,toggletheEnterswitch
In a few seconds, you will be given the opportunity to change this pass- word or keep it and go on.
Change Password? <ENT>=Yes <ESC>=No
Escape to move on, or proceed as in Changing the Password, below.
3.3.2.2Installing or Changing the Password
If you want to install a password, or change an existing password, proceed as above in Entering the Password. When you are given the opportunity to changethepassword:
Change Password? <ENT>=Yes <ESC>=No
nter to change the password (either the default TAI or the previously assigned password), or Escape to keep the existing password and move on.
If you chose Enter to change the password, the password assignment screen appears.
Select new password
T A I
Enter the password using the UP/DOWN SWITCH to change the letters to the new password. The full set of 94 characters available for password use are shown in the table below.
Characters Available for Password Definition:
A | B | C | D | E | F | G | H | I | J |
K | L | M | N | O | P | Q | R | S | T |
U | V | W | X | Y | Z | [ | ¥ | ] | ^ |
Teledyne Analytical Instruments
Part I
