Teledyne 6600 manual Sample Connections

Oil in Water Part III

4 See section for the Alarms Function

a)See Alarm Relays, Section 2.2, Part I under electrical connections

c DCS connections

1Please refer to Section 1.5 Control Unit

Interface Panel for input/output functions related to remote communications.

2See Alarm Relays, section 2.2

3See Digital Remote Cal Inputs for Zero and Span; section 2.2

Reference drawings

a Outline drawing (see addendum drawings)

-physical locations and sizes of electrical and sample connections

bInterconnect drawing (see addendum drawings)

-indicates where electrical connections go

3Sample Connections

a The customer connection to the oil in water analysis system should enter in a downward position enabling a constant available gravity fed non-freezing sample with continuous flows capable of up to 5 liters per minute at pressure provided.

b Assure there are no blockages nor fine filters at the sample tap nor beyond up to the oil in water analysis system.

Teledyne Analytical Instruments Part III: 1-51