Teledyne 6600 manual Part Model

Part III Model 6600

Please refer to the Control Unit Section Part I of the manual.

apower

1utility power (requires remote circuit breaker operation) for pumps if elected.. In the event the systems are turned off for maintenance, etc.(in particular, a bypass pump, homogenizer).

2Sample Utility manually 3-way solenoid water valve, (selects between sample or utility water- usually operated manually).

3Instrument power into control unit (requires external circuit breaker operation) for all autozero valves in sample system, controlled by the Instrument control unit.

Note: The cell purge solenoids may be used in a particular application, instead of zero prepared water.

bSignal and Alarm connections

1Please refer to the Reference drawings below for connections and test points for the signals and alarms.

2a) See Analog Outputs as indicated under Section electrical connections.

b)See also section 1 for the Analog 4-20 mA Output Calibration, setup, testing and functioning.

1-50 Part III Teledyne Analytical Instruments