Teledyne 6600 manual Oil in Water Analyzer, Part I: Control Section, 1.4.1 UP/DOWN Switch

Oil in Water Analyzer Part I: Control Section

1.4.1 UP/DOWN Switch

The UP/DOWN switch is used to select between any subfunctions displayed on the VFD screen such as in the main menue, the system menue, the Alarm menue, etc. When modifiable values are displayed on the VFD, the UP/DOWN switch can be used to increment or decrement the values.

1.4.2 ESCAPE/ENTER Switch

The ESCAPE/ENTER switch is used to input the data, to enter a function, or to exit a function displayed in the alphanumeric display:

•Escape Moves VFD display back to the previous screen in a series. If none remains, returns to Analyze mode screen.

•Enter Within a menue: the funtion selected is entered moving on to the next screen in a series.

With Value selected: Enters the value into the analyzer as data. Advances cursor on VFD to the next operation.

In the Analyze mode: it calls the main menue. Functions called out by the main menue:

-SystemThis function is a menu that calls a number of functions that regulate the analyzer operation.

-SpanThis function spans the instrument. -ZeroThis function zeros the instrument. -Alarms This functions sets the alarm preferences.

-RangeThis function selects whether analyzer is autoranging or locked on one range.

-StandbyPlaces the analyzer in a sleep mode.

WARNING:

The power cable must be disconnected to fully remove power from the instrument.

Teledyne Analytical Instruments Part I: 1-3