Teledyne 6600 manual 3.7The Analyze Function, Part I, Oil in Water Analyzer, Operation

Oil in Water Analyzer Operation 3

•Ranges whose limits are entirely within the span of an adjoining range.

•Ranges where the zero is suppressed, is 1-10, 1-100, etc, however, 80-100, 90-100 is ok where the zero gas is actually 100% concentration and the calibration is inverted.

•In Oil and Water applications, because the range and cell path are pertinent to the water background and preparation of zero fluid by the sample system, the autorange feature should not be used. Only single range is recommended.

Figure 3-2 illustrates these schemes graphically.

0 0.01 0.1 80 90 100

Figure 3-2: Examples of Autoranging Schemes

3.7The Analyze Function

Normally, all of the functions automatically switch back to theAnalyze function when they have completed their assigned operations. The Escape key in many cases also switches the analyzer back to the Analyze function.

The Analyzefunction screen shows the impurity concentration in the first line, and the range in the second line. In the lower right corner, the abbreviation

Teledyne Analytical Instruments Part I 3-27