Installing 3Com Network Access Manager | 25 |
Follow these steps to install the 3Com Network Access Manager components:
1Insert the 3Com Network Access Manager CD in the PC’s CDROM drive. If Autorun is enabled on the PC, the installation starts automatically and you can skip steps 2 and 3.
2From the Start menu, select Run.
3Type D:\setup (substitute the appropriate letter of your
4A splash screen will display and the installer will check that:
■.NET Framework version 1.1 or later is installed on the PC,
■a supported version of Windows is installed on the PC, as shown in Table 5,
■the PC is a member of a domain,
if any of the checks fail, an error message will display indicating the problem and the installer will abort. You need to correct the problem before restarting the installer.
If the checks are successful, the Welcome dialog is displayed, Figure 3.
