Using The Network Administrator User Interface | 37 |
Setting Up 3Com | To configure 3Com Network Access Manager after installation, follow |
Network Access | these steps: |
Manager |
|
| Before adding entries for VLANs, QoS profiles and EFW policies in 3Com |
| Network Access Manager make sure that the VLANs, QoS profiles and |
| EFW policies have already been set up in the network access devices in |
| the network. These settings must be consistent throughout the entire |
| network. |
1Create VLANs, see“Creating A New VLAN”.
2Create QoS profiles, see “Creating A New QoS Profile”.
3Create EFW policies, see “Creating A New EFW Policy”.
4Specify the MAC address(es) for the computers in the domain, see “Entering MAC Addresses For A Computer”
5Create rules and assign attributes to the rules, see “Creating A New Rule”.
6Ensure the appropriate permissions for each network operator who will use 3Com Network Access Manager have been set, see “Selecting Appropriate Permissions For An Operator”.
7Associate the rules with the users, groups, and computers in the network domain.
VLANs View Clicking on VLANs in the Tree pane displays in the Detail pane a list of VLANs already entered into 3Com Network Access Manager. Initially the Detail pane will be empty, until one or more VLAN entries have been created, see “Creating A New VLAN”. After a VLAN entry has been created in 3Com Network Access Manager, the Detail pane will show the VLAN Name and ID, see Figure 15.
