Using The Network Administrator User Interface | 59 |
5Click OK
This completes associating rules with a group.
Displaying And Changing Rules Associated With A Group
To display and change the rules associated with a group, follow these steps:
1Either click on Groups in the Tree pane or if you have created Organizational Units to structure your groups, click on the organizational units subfolders until you reach the desired unit holding the group.
2Select the group in the Details pane and
3Select the Network Access tab, a list of rules created with 3Com Network Access Manager and for which you have read permission will be displayed in the window, see Figure 24. The tick box indicates how the rule is to be applied to the group, see Table 9.
Table 9 Rules Tick Box for A Group
Tick Box Setting | Meaning |
|
|
Black, not ticked | The rule does not apply to this group |
Black, ticked | The rule is applied to this group |
Grey, ticked | The rule is applied to this group indirectly through the |
| group’s membership of one or more groups that have the |
| rule specifically applied |
|
|
4You can change which of these rules are applied to a group by either ticking or removing the tick from rules that are black.
To change the rules applied indirectly through being a member of another group, select the other group from the Detail pane and apply steps 1 to 4 above on the other group.
A group can be associated with multiple rules, however only the highest priority rule associated with the group will be used for the RADIUS authorization.
5Click OK
6If EFW policies are used, click on the Recalculate EFW Membership button.
This completes displaying and changing the rules associated with a group.
