Safety instructions
Before starting up
VCAUTION!
●During installation and before operating the device, observe the instructions on environmental conditions for your device (see section "Technical data" on page 18).
●If the server has been moved from a cold environment, condensation may form both inside and on the outside of the machine.
Wait until the server has acclimatized to room temperature and is absolutely dry before starting it up. Material damage may be caused to the server if this requirement is not met.
●Only transport the server in the original packaging or in packaging that protects it from impacts and jolts.
Installation and operation
VCAUTION!
●The device may only be operated in a maximum ambient temperature of 35°C.
●If the device is integrated in an installation that receives power from an industrial (public) power supply network with the IEC309 connector, the (public) power supply protection must comply with the requirements for
●The On/Off button or the main power switch (if there is one) does not disconnect the device from the mains voltage. To completely disconnect it, you must remove all the power plugs from the power outlets.
●Data cables must be adequately shielded to avoid interference.
●Do not connect or disconnect any data transmission cables during a thunderstorm (lightning hazard).
●Make sure that no objects (e.g. bracelets or paper clips) fall into or liquids spill into the device (risk of electric shock or short circuit).
24 | Operating Manual | BX960 S1 |
