Cleaning the Server Blade

5.4Cleaning the Server Blade

VCAUTION!

Switch off the server blade and remove it from the system unit (see page 36).

Do not clean any interior parts of the server blade yourself; leave this job to a service technician.

Do not use abrasive powder or detergents which dissolve plastic to clean the housing exterior.

Make sure that no liquid gets inside the device and that the ventilation slits on the ServerBlade remain open.

Wipe the server blade housing with a dry cloth to clean. If it is very dirty you can use a damp cloth that has been dipped in water with a mild detergent and well wrung out.

BX960 S1

Operating Manual

49

Page 49
Image 49
Fujitsu BX960 S1 manual Cleaning the Server Blade