
Configuring the Server Blade
IThe controller has its own configuration utility. For further information, refer to the “Embedded MegaRAID Software User’s Guide” (on the ServerView Suite DVD 2 under Industry Standard Servers - Expansion Cards - Storage Adapters - LSI RAID / SCSI Controllers).
IDescriptions of operating systems not covered in the controller manual are provided in the corresponding readme files on the driver CDs.
5.3.3Configuring the server and installing the operating system with the ServerView Installation Manager
Using the ServerView Installation Manager on the ServerView Suite DVD 1 provided, you can conveniently configure the server and install the operating system. This includes configuring the
Advantages of the ServerView Installation Manager
–Wizard assisted configuration of your server hardware and disk arrays
–Wizard assisted installation of all leading server operating systems
–
–Installation of drivers and additional software.
IThe software that can be installed depends on your server’s hardware configuration. This configuration is detected automatically.
IDescriptions of operating systems not covered in the RAID controller manual are provided in the corresponding readme files on the driver CDs.
To find out how to operate the ServerView Installation Manager and for further information, refer to the associated manual.
If you are using the ServerView Installation Manager, you can skip the following section on how to configure the server and install the operating system. Continue from section "Cleaning the Server Blade" on page 49.
BX960 S1 | Operating Manual | 47 |