
Configuring the Server Blade
5.3Configuring the Server Blade
This section contains information about configuring the server blade and installing the operating system.
The operating system can be installed in various ways:
–Local installation with or without the ServerView Installation Manager You can find information on local installation in the following sections.
–Remote installation using console redirection via the user interface of the ServerView Management Blade
You can find information on console redirection in the manual "PRIMERGY BX900 Blade Server Systems ServerView Management Blade S1 User Interface Description". Apart from this, the operating system installation is carried out in the same way as a local installation.
–Importing the clone images from an image repository to the desired server blades.
For more information about this procedure, see the "ServerView Deployment Manager 5.0" manual (on PRIMERGY ServerView Suite DVD 2 under
Industry Standard Servers - Software - ServerView Suite - Server Installation and Deployment).
5.3.1Preparing for local installation
Connect the monitor, mouse, keyboard and a DVD drive to the port on the server blade control panel with the aid of the special Y cable. See "Connecting devices" on page 37.
IMake sure that the energy saving functions are disabled in the Power menu of the BIOS Setup during operation, and that the DVD drive has been activated as a boot medium.
5.3.2Configuring the onboard SATA controller
A SATA controller is integrated on the system board. You can configure the onboard SATA controller either before or during installation with the ServerView Installation Manager. Using the ServerView Installation Manager is recommended.
46 | Operating Manual | BX960 S1 |