Extron electronic PVS 400, 300, 200 manual Connect the power supply via the PoleVault switcher

Optional Accessory Installation — PPC 25

9. If a junction box is being used in a plenum space, ensure the sensor and all wires fit inside the box (as shown at right). All cables leaving the box must be plenum rated. Tighten the cable clamp and secure the lid to the junction box.

9 Ensure the sensor and wires fit completely inside the junction box before attaching the cover

10. Use the included Y-shaped cable assembly to power the Priority Page Controller from the PVS 204SA power supply (as shown). This cable assembly allows both devices to be powered from a single power supply.

Extron

PPC 25

Priority Page

Controller

Extron

PVS 204SA

Twisted Pair
Switcher	To Power
	Supply

10Connect the power supply via the PoleVault switcher

2-32 PoleVault Systems Installation • Optional Accessory Installation