Installation and Operation, cont’d
Cable
Clamp
Installation
Cable
MONITOR | T | 46 | 8 |
| TP |
|
|
INPUT
TP T 468
Figure
4. Reconnect the power supply and restore power to the equipment.
Installing the Euro Channel transmitter
Once the EC transmitter has been cabled and tested, the transmitter can be installed in the Euro Channel.
1.Remove power from the interface by disconnecting the power supply.
2.Mount the interface to the Euro Channel by attaching the faceplate to the two mounting brackets using the four #4- 40 mounting screws (figure
HIFT |
| |
H.S |
| |
MONITOR | MIN/MAX | |
460 | ||
INPUT | ||
T | ||
| TP |
R | AUDIO |
NITO |
|
MO | R |
NO | ITO |
MON |
Euro Channel
Figure
Grounding the transmitter
RGB and computer video transmitters may need to be grounded to ensure that the video and audio are not degraded. The
TP T 15HD A, TP T 15HD AV, and TP T 468 may require grounding if all of the following conditions are true:
•The signal source is a laptop computer.
•No local monitor is connected.
•A local power supply is not being used.
Grounding may also be required if there is no common ground in the power distribution system.
Indications that grounding may be required include:
•The receiver’s Power LED is lit amber when a connection is made to the transmitter.
•The receiver is in auto mode and its Manual/Auto LED flashes.
•The receiver is in manual mode and an image appears only when the Peaking adjustment is at the minimum level. Additionally, the image may be overpeaked with horizontal streaking to the right of displayed information.
•No audio, or distorted and noisy audio, is heard.
Extron TP Transmitters • Installation and Operation |