Device List Page
Figure 16. Device List Page
This page lists all VNC 200 devices detected on the network.
NOTE: If devices are added after this page is displayed they will not automatically
appear on this list. You will need to refresh the list by clicking the Device
List tab, or by refreshing the browser.
Once a VNC 200 device has been detected and listed on the Device List page, an entry will
be displayed even if the device is subsequently disconnected. All valid devices are listed by
device name and their current IP address. Missing devices are easily identified by the lack
of an IP address. These devices are not currently available (for example, the device may be
disconnected from the network or powered down).
The current configuration status of each device is also identified by an icon:
Unconfigured device
Configured as an encoder (source)
Configured as a decoder (display)
Configured as a PC system such as a recorder or playback device
In a new system, all VNC 200 devices will typically be in an unconfigured state. The
remainder of this section will guide you through the process of configuring each VNC 200
as either an encoder (source) or decoder (display).

Online help

Online help is available for each page in the web interface by simply clicking
the Help tab.
VN-Matrix 200 Series • System Configuration 26