System Checkup
Follow this checkup to ensure that all VNC 200 devices in your system are online and
correctly configured as either encoders or decoders.
• Log into the VNC 200 Web Interface (see “VNC 200 Web Interface”).
• Navigate to the Device List page.
Figure 35. System Checkup on Device List Page
Item Test
Is each device correctly configured
as either
•APCsystem/Recorder?
•AnEncoder?
•ADecoder?
Unconfigured devices are marked with a .
For recorder information see the VNM Recorder
User Guide.
To configure as an encoder, see “Configuring a
VNC 200 as an Encoder (Source).”
To configure as a decoder, see “Configuring a
VNC 200 as a Decoder (Display).”
Is an IP address shown with each
device?
If there is no IP address shown, then this indicates
that the device is offline.
• Ensure that the device in question is powered.
• Ensure that all network cables are connected.
• Ensure that the device is correctly configured for
network operation.
VN-Matrix 200 Series • System Configuration 43