/0%2!4)/.3/4//"% 0%2&/2-%$ 7(%. 35"34)454).' 4(%().*%#4/23
ĆRemove the gratings, the burner covers and the knobs;
ĆUsing a wrench substitute the nozzle injectors „J‰ (fig: 5.4 - 5.5) with those most suitable for the kind of gas for which it is to be used.
4HEHBURNEREAREECONCEIVED IN SUCH A WAY SOHAS NOT TOAREQUIREETHE REGULATIONAOF THE PRIMARY AIR
).*%#4/2324!",%
| 2%$5#%$ | ,002/0!.% | .!452!,2'!3 | ||||
| 0/7%2 | 0/7%2 | 7#0 | 7#0 | |||
|
|
|
|
|
|
| |
"52.%23 | "45HR | "45HR | INJECTOR | "YPASS | INJECTOR | "YPASS | |
MM | MM | MM | MM | ||||
|
|
| |||||
|
|
|
|
|
|
| |
!UXILIARYL! | ADJUSTABLE | ||||||
|
|
|
|
|
|
| |
3EMIRAPIDR32 | ADJUSTABLE | ||||||
|
|
|
|
|
|
| |
2APIDP2 | ADJUSTABLE | ||||||
|
|
|
|
|
|
| |
4RIPLE BURNERE4# |
|
| ADJUSTABLE | ||||
|
|
|
|
|
|
| |
Save the orifices removed from the appliance for the future use
2%'5,!4).' 4(%("52.%2 -).)-5- 3%44).'
When switching from one type of gas to another, the minimum flow rate must also be correct: the flame should not go out even when passing suddenly from maximum to minimum flame.
To regulate the Âflame follow the instructions below:
ĆLight the burner
ĆSet the gas valve to minimum
On gas valves provided with adjustment screw in the centre of the shaft (fig. 5.6) Using a screwdriver with max. diameter 3 mm, turn the screw inside the tap until the correct setting is obtained.
For LP/PROPANE gas, tighten the adjustment screw completely.
After regulation repeat the operations indicated in paragraph „2. Pressure regulator‰ at page 12.
If the cooktop has been disconnected and then connected again to the gas supply line repeat the operations indicated in paragraph „5. Leak Testing‰ at page 14.
fig. 5.4
C
J
B
J
A
fig. 5.5
TOOLS NEEDED
A =
B = wrench
C = screwdriver
fig. 5.6
16
