| Page 36 of 37 |
Therefore the PLC responds to 192.168.0.34 which is clearly the wrong address and the FieldServer will not see the response.
Example: - Class A Addressing
A FieldServer with IP address=192.168.1.81 and system_node_id=34 polls for data from a PLC with IP address =192.168.2.33 and Subnet mask = 255.255.0.0
The PLC responds to | 192.168.2.33 |
255.0.0.0
192.x.x.y
Where x is always set to zero and
y is equal to 34 (The PLC obtains the node ID of 34 by inspecting the contents of the poll message.)
Therefore the PLC responds to 192.0.0.34 which is clearly the wrong address and the FieldServer will not see the response.
Thus, if the PLC is using Class A/B IP addressing then the 3rd (Class B) or the 2nd and 3rd (Class A) bytes of the address must be zero as must the FieldServer's if communications are to work.
There are ways around this problem, we believe. The solution requires usage of the Omron PLC routing table. For more help consult with Omron's Tech Support.
FieldServer Technologies 1991 Tarob Court Milpitas, California 95035 USA Web:www.fieldserver.com Tel: (408)
