| Page 33 of 37 |
| ||
|
|
|
|
|
| 7 | FINS_ECODE | Total number of Messages ignored by PLC due to |
|
| error. |
| ||
|
|
|
| |
| 8 | FINS_EMC | Latest Main Error code returned by PLC. |
|
| 9 | FINS_ESC | Latest Sub Error code returned by PLC. |
|
| 10 | FINS_EMRC | Main and Sub Request codes for which PLC |
|
| 11 | FINS_ESRC | returned Error Code. |
|
| 12 | FINS_STOR_SP | Number of times Driver ignored messages |
|
| because of insufficient storage space. |
| ||
|
|
|
| |
| 13 | FINS_NO_WR_THU | Number of blocked attempts to write data via |
|
|
|
|
| |
Appendix B.3. Driver Error Messages
Some configuration errors might produce an error every time a poll is generated. This will fill the error buffer quickly and not add any clarity. For this reason the driver suppresses subsequent similar messages on the System Error Screen. Thus it is possible for the same error produced by multiple Map Descriptors to produce only one error message on the System Error screen. The driver displays subsequent error messages on the Driver Messages screen.
Note : In the actual message you will see that %d has been replaced by an integer, %s by text indicating a data array name or map descriptor name and %x by two hex characters.
Error Message | Description and Action Required | |
FINS_UDP#1: Err. Not Enough |
| |
Space for <%d> items. | Data array length needs to be increased.10 | |
When offset <%d> DA <%s> MD | ||
<%s> |
| |
MRC <%2X> SRC<%2X> |
| |
FINS_UDP#2: Err. MD <%s>. |
| |
Error Returned by PLC. |
| |
MRC <%2X> SRC<%2X> | This message shows a request that produced | |
Main End Code <%2X> Sub End | this error at the PLC. Check Appendix A.1 to | |
Code <%2X> | see the detail for error and action. | |
See Driver Manual for End Codes |
| |
detail... |
| |
FINS_UDP#3: FYI. MRC<%2X> | This command is not supported by the Driver. | |
SRC<%2X> Not Supported | ||
| ||
FINS_UDP#11: Err. Station | Response from PLC is not addressed to this | |
Reqd/Ext <%d/%d> | Client. |
10Some error messages require that the user correct a problem in the configuration. This is done by editing the configuration CSV file, downloading the modified file and resetting the FieldServer to have the changes take effect.
FieldServer Technologies 1991 Tarob Court Milpitas, California 95035 USA Web:www.fieldserver.com Tel: (408)
