| Page 1 of 37 |
1.Omron FINS Description
The Ethernet Omron FINS driver allows the FieldServer to transfer data to and from devices over Ethernet using Omron FINS protocol. The FieldServer can emulate either a Server or Client.
FINS is an Omron protocol which can be used by a PLC program to transfer data and perform other services with a remote PLC connected on an Ethernet Network. It can also be used by remote devices such as PC’s and FieldServer’s to transfer data and perform other services.
The protocol uses the Ethernet protocol called UDP to carry the FINS messages back and forth. The UDP protocol is not connection based and reliability is achieved by using confirmation messages.
This Ethernet Driver can be used to transfer data to and from the Nodes supporting FINS communications.
Max Nodes Supported
FieldServer Mode | Nodes | Comments | |
|
| Omron limit the set of permitted nodes to 126. They are | |
Client | 126 | numbered 1 to 126 corresponding to the last byte of the | |
|
| remote node IP address. | |
Server | 20 | The FieldServer can emulate a maximum of 20 Omron | |
FINS servers. | |||
|
|
FieldServer Technologies 1991 Tarob Court Milpitas, California 95035 USA Web:www.fieldserver.com Tel: (408)
