52 Finalizing the Installation (for qualified installers only)
LP Conversion Instructions
Install the conversion kit prior to installing the gas line to ensure proper gas use.
1Remove the glass (see page 45). Remove the logs and coals (if installed - page 47). Remove the grate and firebacks (see page 47).
2Remove the burner (see illustration below)
Remove the four screws holding the burner assembly in place.
Slide the burner to the left and up to remove.
NOTE: The front of the burner support is removable. It may be removed to aid in burner alignment during
Travis Industries | 4080214 |
