Installation (for qualified installers only) | 9 |
Top Vent or Rear Vent Configuration
This appliance is shipped in the rear vent configuration. To change to the top vent configuration, follow the directions below.
NOTE: the vent configuration affects several aspects of installation (framing, maximum vent rise, maximum vent run). When reviewing the installation requirements make sure to pay attention to the type of configuration being used.
Converting the
Fireplace to Top Vent
Configuration
Remove the 4 screws securing the cover plate. Remove it and place it aside.
Fireplace |
of |
Top |
ofFireplace Back
Remove the 4 screws
securing the cover plate (with
hole).
This part may be discarded.
Remove the 4 screws securing the intake cover plate. Remove it and place it aside.
Remove and discard all of the insulation found near the flue assembly (make sure to remove every piece).
© Travis Industries | 4080214 |
