UNPACKING AND HANDLING
■The professional cooktop should be moved close to its final location. Electric and gas connections should be made (pgs. 15 & 16) and the backguard installed (as required, pg. 8 & 15) before the cooktop is placed in its final position. The grill and griddle sections are fastened in place at the front with screws. They are designed to be stationary and not meant to be removed for cleaning. The griddle has two leveling screws beneath the rear flue cover which can be used to adjust the griddle to the desired slope. The center screw is for shipping and should be removed. See Fig. 2.
ANCHORING THE COOKTOP
■Due to the weight of the cooktop, along with a built- in side frame gasket that is meant to rest and create a seal on the counter top once installed, it is not necessary to anchor the unit to the counter.
Shipping Screw
(remove)
Outer Leveling
Screws (2)
Griddle Flue Cover
Fig. 2
10
