Fisher & Paykel CP-364GD, CP-486GD, CP-485GD, CP-364GL Recommendations on HOOK-UP to GAS Supply

SAFETY PRACTICES AND PRECAUTIONS

■Clean the cooktop with caution. Avoid steam burns; do not use a wet sponge or cloth to clean the cooktop while it is hot. Some cleaners produce noxious fumes if applied to a hot surface. Follow directions provided by the cleaner manufacturer.

■Be sure all the cooktop controls are turned off and the appliance is cool before using any type of aerosol cleaner on or around the appliance. The chemical that produces the spraying action could, in the presence of heat, ignite or cause metal parts to corrode.

■Clean the ventilator hood and filters above the cooktop frequently so grease from cooking vapors does not accumulate on them.

■Turn the ventilator OFF in case of fire or when intentionally “flaming” liquor or other spirits on the cooktop. The blower, if in operation, could unsafely spread the flames.

■DO NOT obstruct the flow of combustion or ventilation air to the appliance. Be sure a fresh air supply is available.

■For safety reasons and to avoid damage to the appliance never sit, stand, or lean on the cooking surface.

■Service should only be done by authorized technicians. Technicians must disconnect the power supply before servicing this appliance.

WARNING:

California Proposition 65 - The burning of gas cooking fuel generates some by-products which are known by the State of California to cause cancer or reproductive harm. California law requires businesses to warn customers of potential exposure to such substances. To minimize exposure to these substances, always operate this unit according to the instructions contained in this booklet and provide good ventilation to the room when cooking with gas.

RECOMMENDATIONS ON HOOK-UP TO GAS SUPPLY:

A manual valve must be installed external to the appliance, in an accessible location from the front for the purpose of shutting off the gas supply. The supply line must not protrude beyond the back of the unit. Make sure the gas supply is turned off at the wall valve before connecting the appliance.

The gas supply connections should be made by a qualified technician and in accordance with local codes or ordinances. In the absence of a local code, the installation must conform to the latest edition of National Fuel Gas Code ANSI Z223.1.

NOTE:

This product must be installed by a licensed plumber or gas fitter when installed within the Commonwealth of Massachusetts.

NOTE:

(mandatory for the State of Massachusetts) Alternate method of supplying gas must be installed into the unit.

Gas Supply	Installer supplied shut-off valve
	must be easily accessible inside
	cabinetry.

6