Tools Needed To Install DishDrawer
STEP 1.5 PRODUCT PARTS
•Wooden Chopping Board
•Level
•Safety Glasses
•Utility Knife
•Pencil
•Drill & Drill Bits (3/32", 9/16" & 11/32") (2.5mm, 12mm, 14mm)
•Sandpaper
•Tape Measure
•Square
•Ruler
•Phillips Screwdriver
•Pliers
•Adjustable Wrenches(x2)
•7/32" (6mm) Allen Key (Integrated Models)
•Router (Integrated Models)
•Jigsaw (Integrated Models)
1.
5.
4.
2.
3.
6.
7.
8.9.
10. 
11. 12.
1. | Template (Single 1) | 7. | Single Connector (1) |
2. | Drain Hose Support (1) | 8. | Edge Protector (1) |
3. | Screw (1) | 9. | Flexible Extrusion 2) |
4. | Wire Clip (1) | 10. | Solderless Lug & Washer (1) |
5. | M8 Bolts (4) | 11. | Inlet Hose Washer (1) |
6. | Washers (4) | 12. | Hose Clamp (1) |
STEP 1.6 ADDITIONAL PRODUCT PARTS FOR INTEGRATED DISHDRAWER
13.Mounting Bracket Nuts (4)
14.Seal (1)
15.Door Screws (4)
16. Badge Kit (2)
13.
16.
15.
14.
