SECTION 5
IIMPORTANT
N | To avoid electric shocks |
INTEGRATED DRAWER FRONT INSTALLATION
STEP 5.1 CHANGING THE INTEGRATED BADGE ENCLOSURE
There are several different colored Integrated badges to choose from. They include black, chrome, satin & brass. Two color options are provided with your machine, other options are available from your local Dealer.
and damage to electronic |
Tcomponents, the integrated badge should
E | be disconnected from the |
DishDrawer when | |
G | changing the badge |
enclosure. | |
R |
|
There are five parts to the Integrated Badge Assembly. They are as follows:
1.Integrated Badge
2.Button Badge
3.Light Pipe
4.Electronics Board
5.Badge Cover
6.Wires
5. |
|
3. | 4. |
|
1. | 2. |
|
6. 
A |
T |
E |
D |
P
R
O
D
U
CButton Badge
T
O | 〈 |
| Connection Runner |
N |
|
L |
|
Y |
|
| Page DS_15 |
STEP 5.2 DISASSEMBLING THE INTEGRATED BADGE ASSEMBLY
5.2.1
Remove Badge Cover from the Integrated Badge.
At the back of the Integrated Badge, slide the Badge Cover away from the wire terminals.
5.2.2
Remove Electronics Board.
Gently hold the wires to remove the Electronics Board. Care should be taken not to handle the front or back of the Electronics Board or touch inside the wire terminals.
5.2.3
Remove the Light Pipe.
Gently tap the Integrated Badge upside down on a hard surface until the Light Pipe comes away or insert a pen or pencil into the front side of the Integrated Badge to either one of the two small holes.
5.2.4
Once you have removed the Electronics Board, Badge Cover and Light Pipe, you can assemble the electronics board into a badge of another color.
STEP 5.3 ASSEMBLING THE INTEGRATED BADGE
5.3.1
Insert the Button Badge into the back of the Integrated Badge. Do not break any of the buttons away from the Connection Runner.
5.3.2
Insert the Light Pipe into the Integrated Badge.
Insert the Light Pipe with the circular ends into the small holes.
5.3.3
Insert the Electronics Board with care, behind the Button Badge.
When installing the Electronics Board, handle only the wires and do not touch the face or back of the Electronics Board or inside the wire terminals.
5.3.4
Slide the Badge Cover into the slot on top of the Integrated Badge.
