TIP
Wiring, Plumbing and Services should be completed before attaching the flexible extrusion.
STEP 2.3 FLEXIBLE EXTRUSION ATTACHMENT FOR 24” (610mm) CAVITY
2.3.1
Flexible Extrusions are supplied to enable the installer to help fill any excess space between the sides of the DishDrawer and the cavity. The two lengths of Flexible Extrusion (supplied) should be attached before pushing the DishDrawer into the cavity for final installation. This Extrusion is designed to fit a 24” (610mm) width cavity.
2.3.2
Open the drawers, exposing the chassis trim.
2.3.3
Remove backing from adhesive tape on
Flexible Extrusion.
2.3.4
Apply as per drawings, ensuring the curved edge of the Flexible Extrusion fits around the corner of the chassis trim.
2.3.5
When checking final fit, ensure DishDrawer is centered and there are even tolerances between DishDrawer and cavity.
