FITTING THE DISHDRAWER
STEP 2.1 DISHDRAWER MOUNTING HOLE LOCATIONS
2.1.1
Draw the cavity center line on the supporting cabinetry.
2.1.2
Center Template in cavity using
2.1.3
Align front of Template to suit surround of cabinetry.
2.1.4
Mark and drill four 15/32" - 9/16"
SECTION 2
TIP
Ensure the cavity is at least 227/8" (580mm) deep.
IMPORTANT
For Integrated product with door thickness other than 3/4” (18mm), the Template position must be adjusted forward or back to allow for this difference.