Bosch Power Tools CM10GD manual Assembly, Unpacking and Checking Contents

BM 2610027879 07-13_BM 2610027879 07-13.qxp 7/8/13 9:52 AM Page 10

Assembly

Unpacking and Checking Contents

Unpacking the Miter Saw – When removing this tool from packaging materials, reach down to the two side carry-handle locations and slowly lift until it clears the package.

!WARNING To avoid severe pinching, never lift or move this saw by gripping

any component of the mechanism support system.

This symbol is placed at various locations on the tool to warn the user of pinch-point areas.

Checking Contents in package – Open the top of the package and look for the included loose parts. Refer to the diagram below.

Some small parts such as the bevel lock lever and miter lock knob require attachment to the tool before it is ready for use – See “Attaching Loose Parts” on page 12.

!WARNING To avoid possible injury, always disconnect plug from power

source before performing any assembly, adjustments or repairs.

Loose Parts - 1 of each shown

10mm Flat Washer Workpiece Clamp

Check off for each part

Manual

Bevel Lock Lever

6mm Flat Washer 6mm Lock Nut

10 mm Socket Tool

6/4mm Hex Key

Dust Bag

Operating/Safety Instructions

Miter Lock Knob

10.