User select options
All about user select mode
User Select mode allows you to configure some of the settings displayed on your AeroTech™ oven control panel.
How to enter user select mode
1Be sure that the oven mode and temperature dials are off and that no automatic/delayed start programs are operating and that the clock is displaying the correct time of day.
2Press the 
then the 
button and hold down
together until the oven ‘beeps’ (about two seconds). The left | Oven mode | ||
hand oven mode display will show | . | ||
display | |||
Sabbath Mode
This mode is designed for religious faiths that observe a ‘no work’ requirement on the Sabbath.
When your oven is in Sabbath Mode
Clock, temperature and oven mode displays will be disabled.
No tones will sound.
No error messages or temperature changes will be displayed, however temperature can be adjusted.
The cavity lights are on if the door is open when Sabbath Mode is set. The cavity lights are off if the door is closed when Sabbath Mode is set.
How to set Sabbath Mode
1Enter the User Select mode and turn the oven mode dial
clockwise until the display shows 
.
2Select the length of time you wish to stay in Sabbath Mode by rotating the Setting Selector 
dial . The maximum is 99 hours in one hour steps and is shown in the clock display. Select a temperature. Bake is the only oven mode available in Sabbath Mode.
Oven mode display
3To start Sabbath Mode, press the 
button. no backlight. The temperature display will show display will not change.
The oven mode display will show 
with ; temperatures can be adjusted but the
22
