STE 58761

1.2.1External Automatic Mode

External

Automatic

Mode (EXT)

External Operation

This mode is used to perform the program automatic

Signal Mode (SIG)

operation. This operation is carried out with

 

external operation signals. For details, see the

 

Interface Manual.

Host Mode (HOST)

This mode is used to perform the program

 

automatic-operation, file uploading and file

 

downloading. All operations are carried out by the

 

host computer through serial communication

 

channel(s). For details, see the Communications

 

Manual.

The mode with which external automatic operation is carried out is defined in the system configuration file. See the Start-up Manual for details.

All file selections, execution mode selections, speed override settings and speed limit settings made in either the Internal Automatic Mode or the Test Operation Mode are also valid in the External Automatic Mode.

1.2.2Internal Automatic Mode

Internal

Automatic

Mode (INT)

Program Selection

Selects a program for execution.

(SELECT)

 

Operation Mode

Selects an operation mode.

Selection (MODE)

 

Speed Override

Selects the speed override.

(MSPEED)

 

Speed Limit

Selects the speed limit.

(LSPEED)

 

Start-up

Starts program execution from the control panel.

Stop (STOP,BREAK)

Suspends or cancels program execution.

Direct Execution

Directly executes a SCOL command.

(DO)

 

Reset (RESET)

Resets the program execution step, variables and

 

digital output signals.

1-4

Page 21
Image 21
Toshiba ste 58761 instruction manual External Automatic Mode, Internal Automatic Mode, Select, Mspeed, Lspeed