STE 58761
2.2.2Hot Starting
!Caution
If an abnormality has generated or the POWER LED lamp on the control panel remains off after the main power switch of the equipment was turned on, turn off the main power immediately and confirm the wiring. Otherwise, you will be struck by an electric shock or a fire will break out. When hot starting has been done, the controller enters a program reset status.
(1)Function
Starts up the controller with files contained in the RAM drive.
(2)Input format
None
(3)Comments
The following subscription files must be in the RAM drive:
CONSTRUC. SYS | EXTRNSEL. SYS * |
ALARM. MES * | SCOL . LIB * |
SYSTEM. PAR | AUTOSTR. BAT * |
USER. PAR |
|
Files marked by an asterisk are not absolutely necessary to run the system. However, you will get an error should you try to execute a function dependent on a missing file.
For more information on these files, see the
－
