STE 58761
(4) Procedure
(a)Step 1: Select the Manual Mode
Turn the master mode switch on the control panel to "MANU".
(b)Step 2: Select the Auxiliary Signal Operation Mode
Push the "Aux. Signal" key on the teach pendant. The Auxiliary Signal Operation Mode menu should then appear.
Auxiliary signal operation mode
| [210] | [212] | [214] |
|
|
[208] | [209] | [211] | [213] |
|
|
Aux 1 | Aux 2 | Aux 3 | Aux 4 Aux 5 Aux 6 | ||
|
|
|
|
|
|
The numbers on the screen correspond to the output signal ports. Auxiliary signals having two output signal ports are set for double solenoids, and those having one output signal port are set for single solenoids. Those having no output signal ports are not set for anything.
Ports that are highlighted in the display are on and ports that are not are off.
(c)Step 3: Turn ports on and off as appropriate
Each time you push a function key corresponding to a port, the status of the solenoid will change from on to off or from off to on. For double solenoids, the status of the two ports will be transposed.
－
