STE 58761

CHAPTER 4

AUXILIARY SIGNALS

(1)Function

Manages auxiliary signals used to control the hand, the air control axes, etc.

(2)Input format

None

(3)Comments

The output signal port and solenoid type corresponding to each function key must be defined (specified) in the system configuration file. For more information, see the Start-up Manual.

Press the "Esc" key to exit the Auxiliary Signal Operation Mode and return back to the original menu.

While under emergency stop or in feed hold, auxiliary signals may be turned on and off.

The initial state including signals which is set for double solenoids in the power ON state is turned off.

4-1

Page 53
Image 53
Toshiba ste 58761 instruction manual Chapter Auxiliary Signals