Fortinet MR8 manual Factory default Transparent mode network configuration, Management IP

Getting started Factory default FortiGate configuration settings

Table 3: Factory default NAT/Route mode network configuration (Continued)

Network Settings

Default Gateway (for default route)	192.168.100.1
Interface connected to external network	wan1
(for default route)

Default Route

A default route consists of a default gateway and the name of the interface connected to the external network (usually the Internet). The default gateway directs all non-local traffic to this interface and to the external network.

Primary DNS Server	207.192.200.1
Secondary DNS Server	207.192.200.129

Factory default Transparent mode network configuration

In Transparent mode, the FortiGate unit has the default network configuration listed in Table 4.

Table 4: Factory default Transparent mode network configuration

Administrator	User name:	admin
account	Password:	(none)
Management IP	IP:	10.10.10.1
	Netmask:	255.255.255.0
DNS	Primary DNS Server:	207.194.200.1
	Secondary DNS Server:	207.194.200.129
	Internal	HTTPS, Ping
Administrative access	WAN1	Ping
	WAN2	Ping
	DMZ	HTTPS, Ping

Factory default firewall configuration

FortiGate firewall policies control how all traffic is processed by the FortiGate unit. Until firewall policies are added, no traffic can be accepted by or pass through the FortiGate unit. The factory default configuration contains one firewall policy that allows all traffic originating on the internal network to access the Internet. No other traffic is allowed through the FortiGate unit. To allow traffic through the FortiGate unit you can add firewall policies. See the FortiGate Administration Guide for information about adding firewall policies.

The following firewall configuration settings are included in the default firewall configuration to make it easier to add firewall policies.

FortiGate-60 Installation Guide 01-28008-0018-20050128 21