Fortinet MR8 manual Factory default NAT/Route mode network configuration

Factory default FortiGate configuration settings		Getting started
	Table 2: FortiGate DHCP Server default configuration
	Name	internal_dhcp_server
	Interface	Internal
	Default Gateway	192.168.1.99
	IP Range	192.168.1.110 – 192.168.1.210
	Network Mask	255.255.255.0
	Lease Duration	7 days
	DNS Server 1	192.168.1.99

Factory default NAT/Route mode network configuration

When the FortiGate unit is first powered on, it is running in NAT/Route mode and has the basic network configuration listed in Table 3 on page 20. This configuration allows you to connect to the FortiGate unit web-based manager and establish the configuration required to connect the FortiGate unit to the network. In Table 3 on page 20, HTTPS administrative access means you can connect to the web-based manager using HTTPS protocol through this interface. Ping administrative access means this interface responds to ping requests.

Table 3: Factory default NAT/Route mode network configuration

Administrator	User name:	admin
account	Password:	(none)
	IP:	192.168.1.99
Internal interface	Netmask:	255.255.255.0
	Administrative Access:	HTTP, HTTPS,
		Ping
	IP:	192.168.100.99
WAN1 interface	Netmask:	255.255.255.0
	Administrative Access:	Ping
	IP:	192.168.101.99
WAN2 interface	Netmask:	255.255.255.0
	Administrative Access:	Ping
	IP:	10.10.10.1
DMZ interface	Netmask:	255.255.255.0
	Administrative Access:	HTTPS, Ping
	IP:	0.0.0.0
Modem interface	Netmask:	0.0.0.0
	Administrative Access:

20 01-28008-0018-20050128 Fortinet Inc.