Configuring NAT
5.In the “Local Address From/To:” fields, type the lowest and highest IP addresses that define the range of private addresses you want to be passed without translation.
If you want the PASS rule to act on only one address, type that address in both fields.
6.When you have completed entering all information, click the Submit button. A page appears to confirm the changes.
7.Click Close to return to the NAT Configuration page. The new rule should no be displayed in the NAT Rule table.
8.On the NAT Configuration page, ensure that the Enable radio button is selected and then click the Submit button. A page appears to confirm your changes.
9.Select Admin > Commit & Reboot and click the Commit button to save your changes to permanent storage.
EN/LZT 108 6492 R2 - October 2003 | 69 |
