
Configuring DHCP
1.Select LAN > DHCP Relay. The DHCP Relay Configuration page appears:
This page provides a text box for entering the IP address of your
ISP’s DHCP server and a table that lists the interfaces on your
HM210dp/di that can relay DHCP information.
2.Type the IP address of your ISP’s DHCP server in the fields provided.
If you do not have this address, it is not essential to enter it. Requests for IP information from your LAN will be passed to the default gateway, which should route the request appropriately.
3.If the interface named
4.Click the Submit button. A page appears to confirm your changes and then the program returns to the DHCP Relay Configuration page.
5.Follow the instructions in the next section to enable the DHCP Relay mode.
7.4.2Enabling DHCP Relay Mode
To enable the DHCP relay mode follow the steps below:
1.Select LAN > DHCP Mode and from the “DHCP Mode” dropdown list select DHCP Relay. Click the Submit button.
50 | EN/LZT 108 6492 R2 - October 2003 |