Manuals / Garmin / Computer Equipment / Modem

Garmin HM210DP/DI manual Configuring PPP Interfaces, Adding PPP Interfaces

Models: HM210DP/DI

1 135

Download 135 pages 7.76 Kb

Page 32

Basic Configuration

5.2Configuring PPP Interfaces

When powered on, the HM210dp/di initiates a connection through your DSL line to your ISP.

The Point-to-Point (PPP) protocol is commonly used between ISPs and their customers to identify and control various communication properties, including:

Identifying the type of service the ISP provides to a given customer.

Identifying the customer to the ISP through a username and password login.

Enabling the ISP to assign Internet information to the customer’s computers.

Your ISP may or may not use the PPP protocol. Contact your ISP to determine if you will need to change the default settings in order to connect to their server.

5.2.1Adding PPP Interfaces

If you intend to use more than one type of service from your ISP, the device can be configured with multiple PPP interfaces, each with unique logon and other properties.

Follow this procedure to define properties for a PPP interface:

1.Select WAN > PPP to display the Point to Point Protocol (PPP) Configuration page.

24	EN/LZT 108 6492 R2 - October 2003

Image 32

Garmin HM210DP/DI manual Configuring PPP Interfaces, Adding PPP Interfaces

Contents

User Guide ADSL ModemHM210dp/di Copyright DisclaimerAbstract Trademark ListHardware Description and Installation Local PC ConfigurationGetting Started with the Configuration Manager IntroductionConfiguring DHCP Basic ConfigurationConfiguring IP Routes Configuring RIP Configuring NATConfiguring DNS Server Addresses Configuring Firewall Settings Administration TasksTroubleshooting Viewing DSL Line InformationGlossary Page 1.2.1 Features 1 Introduction1.1 About this User Guide 1.2 About the ADSL Modem HM210dHardware Description and Installation 2.1.1 Package Contents2.1.2 Subscription for ADSL Service 2.1 Before You Start2.2.1 Front Panel and LED Indicators 2.2 Physical AppearanceLabel Status/DescriptionFigure 2 - Back Panel of the HM210dp/di 2.2.2 Back Panel and Connectors2.3 Choosing a Place for the Router 2.4 Connecting the Hardware 2. Connect to a PC or hub/switch to a single PCto a hub/switch to a hub/switch’s uplink portLocal PC Configuration 3.1 Configuring PCs as DHCP Clients3.1.1 In Windows 95, 98/98SE and Me 192.168.1.13.1.2 In Windows 3.1.3 In Windows XP3.2 Assigning Static IP Addresses to your PCs 3.2.1 In Windows 95, 98/98SE and Me3.2.2 In Windows 3.2.3 In Windows XPGetting Started with the Configuration 4.1 Accessing the Configuration ManagerManager http//192.168.1.14.2 Functional Layout Task barDescription Button / Symbol4.2.1 Commonly Used Buttons and Icons 4.3 The Home Page and System View Table Description Table HeadingDevice DSL WAN Interfaces LAN Interfaces Services Summary 4.4 Commiting Changes and Rebooting Description 4.4.1 Rebooting the HM210dp/di using OptionsSetting EN/LZT 108 6492 R2 - October Reboot from Minimum ConfigurationGetting Started with the Configuration Manager 4.5 Quick Configuration Field Use DHCP Default Route Gateway IP AddressUsername Password Use DNS Enabled/DisabledGetting Started with the Configuration Manager FieldDescription Primary/Secondary DNS ServerBasic Configuration 5.1 Configuring the ATM Virtual Circuit1. Select ATM ATM VC to display the ATM VC Configuration page 5.1.1 Adding ATM VCsSelect a VC interface from the available interfaces, e.g. aal5-0 FieldDescription 5.1.2 Modifying ATM VCs 5.2 Configuring PPP Interfaces 5.2.1 Adding PPP InterfacesField DescriptionThis setting defines the type of firewall PPP InterfaceStatus Protocol Service Name Use DHCP Use DNS Default Route Start - To establish a connection whenever you turn on the HM210dp/diSelect PAP or CHAP as required by your ISP 5.2.2 Checking Your Connection StatusSecurity Information 5.2.3 Modifying and Deleteing PPP Interfaces 5.3 Configuring EoA Interfaces 5.3.1 Adding EoA InterfacesThis setting defines the type of firewall available for both public and in-network accessesField DescriptionSelect an ATM VC interface previously created, e.g. aal5-0 Basic Configuration EN/LZT 108 6492 R2 - October5.4 Configuring IPoA Interfaces 1. Select WAN IPoA to display the IPoA Configuration page5.4.1 Adding IPoA Interfaces FieldInterface Sec Type Netmask RFC Use DHCP Default Route Enable / DisableEnable / Disable Gateway IP Address5.4.2 Checking Your Connection Status Basic Configuration5.5 Bridging Connection Mode 5.5.1 Defining Bridge Interfaces5.5.2 Check Your Connection Status 5.5.3 Deleting a Bridge InterfaceConfiguring IP Routes 6.1 Overview of IP Routes6.2 Viewing the IP Routing Table Field DescriptionDestination Netmask NextHop IFName Route Type Route Origin Action Displays and icon you can click to delete a route6.3 Adding IP Routes 7 Configuring DHCP 7.1 Overview of DHCP7.2 DHCP Modes DHCP ServerDHCP Client 7.3 Configuring DHCP ServerDHCP Relay Agent 7.3.1 Creating DHCP Server Address Pools Start IP Address End IP Address Mac Address FieldDescription 7.3.2 Enabling DHCP Server Mode 7.3.3 Configuring Your PCs as DHCP Clients 7.3.4 Viewing, Modifying and Deleting Address Pools7.3.5 Excluding IP Addresses from a Pool 7.3.6 Viewing Current DHCP Address Assignments7.4 Configuring DHCP Relay 7.4.1 Defining the DHCP Relay InterfacesField Description7.4.2 Enabling DHCP Relay Mode 7.4.3 Configuring Your PCs as DHCP Clients 8 Configuring NAT 8.1 Overview of NAT8.2 Viewing NAT Configuration Configuration page appearsDescription Enable/Disable radio buttons, which allow you to turn on or off theField 8.3 Viewing NAT Rules and Rule Statistics The NAT Rule Configuration table displays a row containing basic information for each rule. For a description of these fields, refer to the instructions for adding rules in section 0 “Adding NAT Rules” Description 8.4 Viewing Current NAT TranslationsField Field DescriptionNAT Direction Entry Age Translated InAddress In Address Out Address In/Out Pckets In Ports8.5 Adding NAT Rules 8.5.1 The NAPT Rule8.5.2 The RDR Rule 2. In the ”Rule Flavor” dropdown list, select RDR 8.5.3 The BASIC Rule 2. In the ”Rule Flavor” dropdown list, select BASIC 8.5.4 The FILTER Rule 2. In the ”Rule Flavor” dropdown list, select FILTER 8.5.5 The BIMAP Rule 8. Enter a “Destination Address From/To” …2. In the ”Rule Flavor” dropdown list, select NAPT 8.5.6 The PASS Rule 5. In the “Local Address From/To” fields, type the lowest and highest IP addresses that define the range of private addresses you want to be passed without translation 9 Configuring DNS Server Addresses 9.1 Assigning DNS AddressesStatically Dynamically from a DHCP pool9.3 Configuring DNS Relay Configured on the HM210dp/diOption 1 - Using a PPP connection to learn the DNS 9.2 Overview of DNS RelayEN/LZT 108 6492 R2 - October Option 2 - Configuring DNS on the HM210dp/diConfiguring DNS Server Addresses Go to Service DNS to display the DNS Configuration page Configuring DNS Server Addresses10 Configuring RIP 10.1 Overview of RIP10.2 Configuring the RIP 1. Select Services RIP and the RIP Configuration page appears10.3 Viewing RIP Statistics Configuring RIP EN/LZT 108 6492 R2 - October11 Configuring Firewall Settings 11.1 Global Firewall SettingsField DescriptionBlacklist Status Blacklist Periodmin Attack Protection DOS Protection Max Half open TCP Conn11.2 Configuring IP Filters format, e.g. j.smith@onecompany.xom11.2.1 Viewing Your IP Filter Configuration 11.2.2 Configuring IP Filter Global Settings 11.2.3 Creating IP Filter RulesEN/LZT 108 6492 R2 - October Configuring Firewall Settings2. Enter or select data for each field that applies to your rule Field DescriptionRule ID Action Direction Interface In Interface Log Option Security Level Blacklist Status Log TagApply Stateful Inspection Enable if you configure a Log TagStart/End Time Src IP Address Dest IP Address Protocol Source Port Dest Port TCP Flag ICMP Type ICMP Code IP Frag Pkt Yes The rule will be applied only to packets that contain fragmentsEnable Default The rule is in effect for the specified time period 11.2.4 Viewing IP Filter Statistics 11.2.3.1 IP Filter Rule Examples11.2.5 Managing Current IP Filter Sessions FieldDescription Session Index11.3 Blocking Specific Protocols Description ProtocolThe following list describes each of the available protocols AppleTalk NetBEUI 12 Administration Tasks 12.1 Changing the System Date and Time1. Select Home Modify to display the System - Modify page Fieldhttp//myrouter.mydomain.com 12.2 Configuring User Names and PasswordsManager http//myrouter To add login User Id or change the login password, proceed as follows 12.3 Upgrading the Software 12.4 Using Diagnostics Select the VC on which you want to execute diagnostics and then click the Submit button 12.5 Modifying Port Settings 12.5.1 Accessing a Server with a Non-Standard Port Number12.6 Viewing System Alarms 13 Viewing DSL Line Information Viewing DSL Line InformationYou can click the Clear button to reset all counters to zero, and the The DSL Statistics page reports error data relating to the last 15 minutes interval, the current day, and the previous day Troubleshooting Indication/SymptomTroubleshooting Suggestion 14.1Troubleshooting Suggestion 14.2 Internet AccessIndication/Symptom 14.3 Configuration Manager Program 14.4 Diagnosing Problem Using IP Utilities14.4.1 How to use WINIPCFG Indication/Symptom14.4.2 How to use IPCONFIG 14.4.3 How to use PING 15.1 Product Care and Maintenance 15 Important Information15.2.3 Limited Warranty 15.2 License Agreement15.2.1 License 15.2.2 Term15.2.6 Governing Law 15.2.4 Intended Use15.2.5 Limitation of Liability 15.3.2 Safety Approvals 15.3 Regulatory Information15.3.1 EU Directives 15.3.1.1 Declaration of Conformity15.3.3 EMC Approvals 15.3.2.1 UL 1950 Statement15.3.3.1 FCC Part 15 Statement 15.3.4 Telecom Approval 15.3.4.1 FCC Part 68 Statement15.3.6 Power Supply 15.3.5 Caution15.3.7 Environmental Information For EU15.3.8 Intended Use The HM210dp/di is intended for indoor public and private useImportant Information EN/LZT 108 6492 R2 - OctoberAuthenticate 16 GlossaryADSL BridgingBroadband BroadcastCHAP DeviceDomain name DownstreamEncapsulation EthernetFirmware GatewayG.dmt G.liteHost HTTPICMP IGMPMAC address NAT rulePacket PINGPort POTSRemote RoutingSDNS SNMPT1.413 TCP/IPTelnet TFTPUpstream VPI and VCI