Fostex D-108 Undo and redo recording, To cancel the undo operation, press the Redo key again

D-108 Quick Operation Guide

Undo and redo recording

Everybody makes mistakes. If you make a mistake in recording, you can restore and re-do the data that existed before the mistake occurred.

These functions are called “Undo” and “Redo,” and are executed by the UNDO key and REDO keys on the control panel.

The Undo function enables you to cancel the latest recording or edit and restore the previous state. Using the Redo function after using the Undo function enables you to cancel the Undo operation and restore the latest recording or edit. These functions have some limitations as described in the <Note> below.

After recording		Recorded area
	Undo	Redo
Before recording

<Note>

You can repeatedly use the Undo/Redo functions until you perform one of the following operations:

*You make a new recording.

*You perform a new edit (Copy/Paste, Move/Paste, Auto Punch in/out, Erase, etc.).

*You turn off the power to the D-108.

*You select a different Program.

*You eject a disk.

	1	2
AUTO PUNCH				EXECUTE	EXIT
IN	OUT	END	DISP SEL	/YES	/NO
AUTO RTN			TIME BASE SEL
ERASE	UNDO	REDO	HOLD/	STORE	RECALL
			PGM SEL		PREVIEW
LOCATE	VARI PITCH
REWIND	F FWD

1.After making a recording (or playing back a newly recorded data), press the UNDO key.

The D-108 displays [Undo!], then [COMPLETED !], and displays the previous Time Base indication.

Undoing the recording will restore the status obtained before recording.

OL
0
3
6							44.1kHz
9
12
18							COMPLETED!
24
30
42
∞
1	2	3	4	5	6	7	8

2.To cancel the undo operation, press the REDO key again.

The D-108 displays [Redo!], then [COMPLETED !], and displays the previous Time Base indication. Performing the Redo operation will cancel the Undo operation and restore the state obtained after recording.

OL
0
3
6							44.1kHz
9
12
18							COMPLETED!
24
30
42
∞
1	2	3	4	5	6	7	8

22