Operating Method
1.Switch on the Power switch on the right side panel. The light will be on. The ice
maker will start working automatically and feeding water.
2. After the first feeding of the water, the machine will automatically go to the ice making stage, and the sound of water spraying will be heard.
3. Ice will be harvested to the ice storage bin. When the storage bin is filled to the point that the
4.Excess water will flow through the drain
outlet at the back of the machine and empty into the floor drain.
IMPORTANT:
•Although the unit has been tested at the factory, due to
•Never turn the water supply tap off when the icemaker is working.
How the Machine Makes Ice
There are two distinct cycles: freeze and harvest.
During the freeze cycle, water is sprayed against the evaporator surface.
In the harvest cycle, the ice is released and water enters the machine. A complete cycle takes about 20 minutes, but is dependent on temperature and operating conditions.
Freeze: During the freeze cycle the compressor is pumping refrigerant, the fan motor is blowing air, and the water pump is circulating water. When the batch of ice has been fully formed, the ice maker stops the freeze cycle and begins to harvest the ice.
15
