Friedrich R410A Accessories, VPAWP1-8, VPAWP1-14, VPAL2, VPSC2, VPRG4, VPDP1, Model, Description

ACCESSORIES
MODEL	DESCRIPTION		PHOTO
	WALL PLENUM Two-part sleeve that telescopes in and out
	from 5 1 2 to 8 in depth. The wall plenum sits inside the
VPAWP1-8	exterior wall penetration.
	DIMENSIONS: 303 8 high x 24 1 8 wide
	CUTOUT DIMENSIONS: 307 8 high x 245 8	wide.
VPAWP1-14	Same as VPAWP1-8, but telescopes 8 to 14 as required.
	ARCHITECTURAL LOUVER Extruded aluminum louver
VPAL2	that attaches to the outdoor section of the wall plenum.
	DIMENSIONS: 311 16 high x 25 9 16 wide.
VPSC2	Same as VPAL2 but can be ordered in a special color to
	match the exterior wall.
	DIGITAL REMOTE WALL THERMOSTAT Single stage
RT4	thermostat, used on VERT-I-PAK units. Hard wired with
	single speed fan. Direct replacement for RT2.

	DIGITAL REMOTE WALL THERMOSTAT Single stage
	cool, single stage heat thermostat. Features high/low fan
RT6	speed switch, Hi/Low temperature limiting. Thermostat is
	hard wired and is unit powered. Features backlight display
	and multiple configuration.
	ACCESS PANEL / RETURN AIR GRILLE - Serves as an
	access panel to chassis and interior return air grille. A
	field-supplied (25” x 20”) filter is mounted inside the hinged
	access door.
	Kit contains hinge bracket for mounting the door with the return
	air openings high or low on the door for optimal sound
VPRG4	attenuation.
	For 9,000 / 12,000 / 18,000	Btu models, it is recommended to
	install the door with the hinge on the right side and the return air
	openings high on the door. For 24,000 Btu models, it is
	recommended to install the hinge on the left side with the return
	air openings low on the door.
	DIMENSIONS: 58" high x 29" wide.
	CUTOUT DIMENSIONS: 55	3/4" high x 27" wide.
VPDP1	DRAIN PAN Drain pan may be installed prior to chassis for
	easy installation/removal. For VPAK 24K only.

47