4.2.1 Preparation for Use with Filter Paper or Filter Pad

1.Pull the filter pan out from the cabinet and remove the crumb screen, hold- down ring, and filter screen.

The filter pan is equipped with rollers in rails, much like a kitchen drawer. The pan may be removed for cleaning or to gain access to interior components by lifting the front of the pan to disengage the front rollers, then pulling it forward until the rear rollers clear the rails. The pan cover must not be removed except for cleaning, interior access, or to allow a shortening disposal unit (SDU) to be positioned under the drain.

Remove the crumb screen, hold-down ring, and filter screen from the pan. Clean all components with a solution of detergent and hot water, then dry thoroughly.

2.Inspect the filter pan connection fitting to ensure that both O-rings are in good condition.

Inspect the filter connection fitting O-rings.

3.Place the metal filter screen in the center of the bottom of the pan.

4-3